HEMPEL HEMPATEX ENAMEL 56360 | HEMPEL ARCYLIC RESIN TOPCOAT
Description
Hempatex Enamel 56360is a physically drying topcoat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention. The product is resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.
Features & Benefits
Features & Benefits
- For new build, maintenance and repair
- For moderately to severely corrosive environment
- Physically drying
- Service temperature maximum 80°C (dry exposure)
- For exterior and interior usage
- Glossy with good gloss and colour retention
- Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils
- Finishing coat inHempatexsystems
-
Apply with brush/roller, air spray or airless spray.
Nozzle pressure: 150 bar [2200 psi] Nozzle orifice: 0.017'' - Recommended thinner/cleaner:Hempel Thinner 08080
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C. Two coats of the topcoat may be necessary to obtain full hiding power.
Hempatex qualities are thermoplastic, therefore prolonged direct pressure at temperatures above 40°C [104°F] may cause film indentations.
