PRODUCT DESCRIPTION

Nippon Paint Fibercote is a premium water-based acrylic coating specifically developed to protect and beautify fiber cement surfaces. It is uniquely formulated to provide a natural wood-like appearance to cement-based materials such as wood-replacement planks, siding, eaves, and fascia boards. This translucent pigmented varnish penetrates deep into the substrate, offering superior adhesion and long-lasting durability. It features excellent resistance to alkalinity, weathering, and UV rays, ensuring that surfaces do not fade or peel under harsh tropical conditions. Additionally, its anti-fungus and anti-algae properties keep exterior features clean and aesthetically pleasing.

TECHNICAL DATA

• Paint Type: Water-based (100% Acrylic Emulsion)

• Finishing: Translucent Satin / Sheen

• Recommended Substrate: Fiber Cement and Composite Board

• No. of Coats: 2 – 3 coats

• Theoretical Coverage: 10 – 12 m² per litre per coat (Dependent on substrate porosity)

• Drying Time:
  • Touch Dry: 20 – 30 minutes

  • Hard Dry: 1 hour

• Recoating Interval: 2 – 3 hours

• Volume Solids: ~21% - 28%

• Shelf Life: Up to 36 months in a tightly sealed container

APPLICATION INSTRUCTIONS

• Mixing: Stir the paint thoroughly with a clean paddle before use. Consistent stirring is vital to maintain the uniformity of the translucent wood-tone pigments.       

• Thinning:
  • 1st Coat: Dilute with 20% - 25% clean water to act as a penetrative sealer.

  • 2nd & 3rd Coat: Dilute with a maximum of 5% water (or use undiluted for best performance).

• Application Method: Apply using a high-quality Brush or Roller. For a natural wood grain effect, apply in long, continuous strokes following the texture of the plank.

• Cleaning: Clean all tools and equipment with clean water immediately after use.

RECOMMENDED COATING SYSTEM

Standard System (For Fiber Cement):

• Basecoat (Optional): 1 coat of Nippon Timbershade (Light Grey or Light Beige) is recommended to embellish the substrate appearance and help create a closer natural wood grain finish.

• Topcoat: 2 – 3 coats of Nippon Fibercote.

Decking / High Durability System:

• Basecoat: 1 coat of Timbershade.

• Topcoat: 2 – 3 coats of Fibercote.

• Protective Clear: 1 coat of PU Recoatable Clear Coat (for enhanced durability on walkable surfaces).

SURFACE PREPARATION

• General Cleaning: Remove all loose, powdery residues, dust, oil, and foreign matter by wire brushing or scraping.

• Moisture & Alkalinity: New fiber cement boards must be fully cured. Ensure moisture content is below 16% and alkalinity is below pH 9.

• Fungus Treatment: Treat any areas affected by fungus or algae growth with Nippon Fungicidal Wash. Rinse with water and allow to dry.

• Repair: Fill cracks or uneven surfaces with a suitable putty/filler. Pro Tip: Dilute the filler with 15-25% of the finish paint to ensure patching marks are less visible under the translucent coat.

• Sanding: Smoothen repaired areas with sandpaper and ensure the surface is completely dry before painting.