PRODUCT DESCRIPTION
Nippon Paint Roadline Paint (Reflective) is a high-performance, fast-drying alkyd-based coating specifically designed for road marking and traffic safety. This product contains premium glass beads that provide excellent retro-reflectivity, ensuring high visibility during nighttime and in low-light conditions. It is engineered to be highly durable, withstanding heavy traffic wear, oil, and grease. Its quick-drying property minimizes traffic disruption during application. Formulated for both bitumen and concrete surfaces, it is ideal for use on roads, highways, parking lots, and factory floor markings.
Technical Data
-
Paint Type: Solvent-based (Alkyd)
-
Finishing: Matt (Reflective)
-
Binder: Alkyd Resin
-
Thinning: Ready for use. If thinning is required, use maximum 5% Nippon Roadline Thinner.
-
Touch Dry: 5 – 10 minutes (depending on temperature and humidity)
-
Hard Dry: 30 minutes
-
Recoating Interval: Minimum 1 hour
-
Theoretical Coverage: 9 – 11 m² per litre per coat
-
No. of Coats: 1 to 2 coats
-
Shelf Life: Up to 24 months in a tightly sealed container
Application Instructions
-
Application Method: Apply using a high-quality Brush, Roller, or Conventional Air Spray.
-
Dilution: Stir the paint thoroughly before use. It is recommended to use the paint as supplied. If thinning is necessary for spray application, use Nippon Roadline Thinner.
-
Cleaning: Clean all tools and application equipment with Nippon Roadline Thinner or Turpentine immediately after use.
-
Safety Note: This product is flammable. Ensure adequate ventilation and keep away from heat, sparks, and open flames during application.
Recommended Coating System
-
Primer (Optional): Usually not required for bitumen surfaces. For concrete surfaces, ensure the substrate is sound or apply 5100 Wall Sealer if the surface is chalky.
-
Topcoat (1-2 Coats): Roadline Paint (Reflective).
-
Note: Ensure the thickness of the wet film is consistent to maintain uniform reflectivity across the marked area.
Surface Preparation
-
General Cleaning: Surfaces must be dry, clean, and free from dirt, grease, oil, and loose matter.
-
Debris Removal: Remove all loose or defective paint, powdery residues, and dust by sweeping or using compressed air.
-
Oil & Grease: Remove oil and grease stains with a suitable detergent or solvent and allow the surface to dry completely before painting.
-
Moisture Content: Ensure the road surface is dry. Do not apply during wet weather or if the surface is damp, as this will significantly affect adhesion.
-
Concrete Surfaces: New concrete must be allowed to cure for at least 28 days before application.
Ready to order or need expert advice?
Contact us on WhatsApp now for fast response, latest prices, and product recommendations. Our team is ready to support your project with the right solution—quickly and hassle-free!