Weberset Easy Flex ΘαΠΤ΄ΙΧ©½Ί
DESCRIPTION
%ͺ Ensure the substrate is dry, sound, flat/true, and free of contaminant.
%ͺ Fix ceramic tiles dry; do not soak in water.
%ͺ Mix weberset easy flex with water (or latex admixture) according to the recommended ratio. Mechanical mixing is recommended.
%ͺ Spread adhesive onto the substrate at a bed thickness of 3 - 6 mm (thickness may vary depending on tile size and thickness) using a suitable notched trowel.
%ͺ Spread adhesive over no more than 1 m² at a time to prevent skin-over.
%ͺ Promptly place tiles onto the adhesive bed, twisting slightly to ensure good contact (solid bed fixing).
%ͺ Periodically touch the adhesive bed to check for skin-over. If the adhesive bed is no longer tacky/sticky, re-trowel the adhesive.
%ͺ Maintain joints approximately 2 - 3 mm wide between tiles.
%ͺ Remove excess adhesive from the tile surface and joints before it hardens.
%ͺ Allow to set for 24 hours before beginning grouting.
FEATURE & BENEFITS
%ͺ C2TE tile adhesive
%ͺ Good bond strength (>1.5 N/mm²)
%ͺ Suitable for both wall and floor applications.
USES
Suitable for fixing Ceramic Wall & Floor Tiles, Vitrified Homogeneous Tiles, Porcelain Tiles, Mosaics, Quarry Tiles, Terracotta, Marbles, Granites, Slates, Terrazzo, Brick Veneer, Decorative Stones etc., to wall & floor, dry or wet, interior or exterior areas.
COLOUR
Grey
PACKAGING
25 kg / bag
