The KS700 is the surround speaker companion for the K700/K700 Pro series. Utilizing Ken Kreisel invented tripole design, KS700 radiates sound three-way. This 180-degree arrangement produces a full immersion sound even in small spaces. Compared to the KS500, the 5-driver line array in the front baffle of KS700 provides greater sound density and headroom. The results are excellent ambient effects and realistic rear presentation and perfect for Dolby Atmos and DTS:X surround sound.
KS700 can operate in three modes: TriFx™(3D Tripole Sound), Dipole(sound from the side only), and Direct Radiator(sound from the front only). You can select these modes by inserting or removing a jumper on the back of the speaker. Ken Kreisel recommends that most users set the speaker at the TriFX™ to obtain the broadest possible surround listening sweet spot with pinpoint location accuracy.
KS700 has two 27mm low vibration tweeters, one 27mm pro tube tweeter, two 5.25" high sensitivity midrange drivers on the front, and two 3" full-range drivers on the side.
SPECIFICATION
| Dimension |
333mm x 309mm x 160mm (H x W x D) |
| Weight |
8.76KG |
| Frequency Response |
65Hz-30kHz (±2dB) |
| Sensitivity |
89dB |
| Front Drivers |
27mm Low Vibration Tweeter x 2
27mm Pro Tube Tweeter x 1
5.25" High Sensitivity MIdrange Driver x 2 |
| Side Drivers |
3" Full Range Driver x 2 |
| SPL |
125dB (1 meter, 10 Secs) |
| Impedance |
4 Ohm |
| Recommended Amplifier Output |
25 - 300W |
| 3D Push-Pull-Pulsar |
Yes |
| Crossover |
Phase Focused Design |
| Matrix Driver Configuration |
Yes |
| Pro Tube Tweeter |
Yes |
| Cabinet Designed |
Sealed |
| 3D Tripole Surround |
Yes |
| Finishes |
Matte Black |
