|
Model composition |
Main Monitor(VL-MWD275) x1, Door Station(VL-V524L) x1, Wireless monitor(VL-WD619) x 1 |
|
Maximum Connectable Units |
Door Station |
Up to 2 (1 included with VL-SWD275) |
|
Monitor |
Up to 3 extension monitors (not including the main monitor) |
|
Wireless Monitor |
Up to 6 (1 included with VL-SWD275)
*A total of up to 6 Wireless sub monitors and Extension monitors can be registered. |
|
Wireless Repeater |
Up to 2 (sold separately) |
|
Connectable Devices |
E-lock Release Support |
Up to 2 (user supplied) |
|
PBX |
Only Panasonic PBX |
|
Convenience |
Picture Recording |
Internal memory: Up to 50 visitors/sessions (up to 4 still images per visitor/session) |
|
Night Vision |
Yes (LED lights) |
|
Touch Panel / Pan & Tilt |
- / - |
|
Voice Changer |
Yes (One-touch) |
|
Intercom call |
Yes (between main monitor, wireless sub monitor and extension monitor) |
|
Monitor |
Power source |
220-240 V AC, 50/60 Hz |
|
Power consumption |
Standby: 2.9 W , Operating: 13.7 W Measurement conditions: door station VL-V524 (1 pc.) is connected to the main monitor and wireless monitor VL-WD619 (1 pc.) is linked to the main monitor. |
|
Dimensions (H x W x D) |
Approx. 158 x 201 x 25 mm |
|
Mass (weight) |
760 g (Including AC cable) |
|
Operating environment |
Ambient temperature: Approx. 0 ¡æ to +40 ¡æ, Relative humidity (non-condensing): up to 90 % |
|
Display size |
7-inch wide colour / WVGA (800 x 480 pixels) (Touch sensor keys) |
|
Display language |
English, Arabic |
|
Talking method |
Hands-free |
|
Frequency range |
1.88 GHz to 1.90 GHz |
|
Installation method |
Wall mount (mounting bracket supplied) |
|
External material |
Flame retardant ABS resin |
|
Door Station |
Power source |
Power supplied by the main monitor |
|
Dimensions (H x W x D) |
Approx. 152 x 102 x 35.5 (21.5 *) mm *Excluding sections embedded into the wall. |
|
Mass (weight) |
Approx. 225 g |
|
Operating environment |
Ambient temperature: Approx. -15 ¡æ to +55 ¡æ, Relative humidity (non-condensing): up to 90 % |
|
Talking method |
Hands-free |
|
Viewing angle |
Horizontally: Approx. 85°, Vertically: Approx. 54° |
|
Image sensor/ Camera (pixel) |
1/3 inch CMOS sensor (Approx. 1.3 M pixels) |
|
Minimum illuminance required |
1 lx (within approx. 50 cm from the camera lens) |
|
Lighting method |
LED lights |
|
IP rating (INGRESS PROTECTION) |
IP44
*Water resistance is only assured if the doorstation is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. |
|
Installation method |
Surface mount (mounting base supplied), Flush mount (mount box sold separately) |
|
External material |
Flame retardant ABS resin |
|
Wireless Monitor |
Power source |
Main body: Rechargeable battery AAA (R03)
Ni-MH battery (1.2 V, 550 mAh)x2 |
|
Dimensions (H x W x D) |
Approx. 173 x 52 x 30 mm (excluding protruding sections) |
|
Mass (weight) |
Approx.160 g (including the batteries) |
|
Operating environment |
Ambient temperature: Approx. 0 ¡æ to +40 ¡æ, Relative humidity (non-condensing): up to 90 % |
|
Display size |
2.2-inch colour / QVGA (320 x 240 pixels) |
|
Frequency range |
1.88 GHz to 1.90 GHz |
|
RF transmission power |
Approx. 10 mW (average powerper channel)
250 mW (max.) |
|
Operating time |
Standby use: approx. 80 hours*When used fully charged in an operating temperature of 20 °C. |
|
Charging time |
Approx. 8 hours*When the operating temperature is 20 °C. The charging time may increase when the operating temperature is lower than this. |
|
Transmitting range |
Approx. 100 m (line-of-sight distance between the main and wireless monitor) |
|
External material |
ABS resin |
|
Charger |
Power source |
AC adaptor (5.5 V DC, 0.5 A) |
|
Power consumption |
Standby: 0.6 W * , Charing: 1.6 W*When the sub monitor with full-charged batteries is placed on the charger. |
|
Dimensions (H x W x D) |
Approx. 43 x 81 x 76 mm (excluding protruding sections) |
|
Mass (weight) |
Approx. 70 g (excluding the AC adaptor) |
|
Operating environment |
Ambient temperature: Approx. 0 ¡æ to +40 ¡æ, Relative humidity (non-condensing): up to 90 % |
|
External material |
ABS resin |
